Concrete Coatings Long Beach

Most of the floor in a small Long Beach commercial building is in the half the public never sees. We coat that half: the receiving door, the stockroom, the back rooms and the run through to the front, in seamless epoxy and quartz systems that seal the concrete, wash down at closing and hold their surface for years. Which of the two builds you end up with gets decided in the room the deliveries come into, not in the one you show people.

That is the useful thing to know before you collect quotes. A Long Beach unit takes its stock straight off the street, so the floor inside the roll-up door is doing work that a bigger site would hand to a raised concrete dock.

Polyurea Garage Floor Coating

A Floor That Takes Deliveries and Wipes Clean

What you get first is a floor that cleans in one pass. Grit tracked in off the street, water off a rainy delivery and the fine dust that comes off cardboard stay up on the surface where a broom and a mop reach them, instead of grinding down into open concrete. That is why a sealed floor still looks like a floor after a few years of stock crossing it.

It also stops the room looking older than it is. Sealed concrete does not dust up under traffic, and the finish carries oil stains, tire marks and daily scuffing without holding on to them. Across the length of a lease that adds up: you are maintaining a floor rather than budgeting for a new one, and we get asked back to these buildings to do the next room rather than to redo the last one.

All of this is ordinary commercial flooring work for us, and the base is usually a solid color epoxy: a 100% solids build that bonds straight to prepared concrete and gives you one uniform sealed surface across a whole room. It is the quiet option, and in a stockroom quiet is what you want.

Flake Chip Flooring
Polyaspartic Floor Coating in Commercial Space

Epoxy Floors for Long Beach Stockrooms and Back Rooms

The rooms we are asked about are the same few every time. A receiving area inside a roll-up door, a stockroom with shelving down both walls, a prep or assembly room, and the threshold where that half of the building meets the part customers walk on. Independent shops on Pine Avenue and 4th Street, the studios and workshops around Bixby Knolls, and the small units along Anaheim Street all run some version of that layout.

For most of it we install a flake epoxy build: a high-build epoxy base, a full vinyl chip broadcast and a clear polyaspartic topcoat. It is the same system people ask us for on a garage floor, and it belongs in a stockroom for the same reasons. The epoxy base bonds and takes the knocks, the polyaspartic on top carries the abrasion resistance, and the chip layer between them adds the texture.

Where a room stays wet, or the cleaning involves something stronger than water, we specify a quartz flooring build instead. The aggregate is what does it: a quartz broadcast carries the best chemical and abrasion resistance of anything we install, and it holds its texture without a separate additive. Everywhere else a flake flooring system is the better buy.

When the Floor Is the Loading Dock

Almost none of the commercial buildings we work in around Long Beach have a raised dock. Stock comes off a van at street level onto the same slab that runs through the rest of the unit, so one patch of floor a few strides deep is doing the job a purpose-built dock would do somewhere larger. It is worth specifying for, and it costs very little to say so at the quote stage.

So we quote from the delivery door inward. Whatever build the receiving end needs is the one we carry through the stockroom, because a single system across the working half is quicker to lay, easier to clean and leaves no edge between rooms. Where the slab is sound and you would rather finish the concrete itself than coat it, polished concrete is the other way to go: a mechanically densified surface with no film on top.

Commercial Polished Concrete
Room with clean, shiny brown quartz epoxy flooring and white walls with metal door panels.

Serving Long Beach and the Harbor Area

Rise Coatings installs commercial floors right across Long Beach, from Bixby Knolls and the Traffic Circle to the working buildings near the port and the 710, along with the garages and workshops on the streets in between. Work is quoted from a walkthrough and the estimate is free and done on site. We also work in Torrance, Redondo Beach and Anaheim.

Contact us today to discuss your concrete coating project!

Contact Rise Coatings

Give us a call if you have any questions related to our flooring services, if you would like to inquire about a large flooring project or would like to receive a complimentary onsite estimate.

Get Your Free Estimate
Thank you for contacting Rise Coatings. One of our representative will get back to you as soon as possible.
Oops! Something went wrong while submitting the form.